Install guide
Cybertruck Wiper Blade
Tesla's owner steps for replacing the Cybertruck wiper blade. The same page also describes cleaning the blade.
Follow the manufacturer's instructions; this WedgeMods summary may be incomplete.
- Difficulty
- Easy
- Time
- The published instructions do not state a time.
- Product
- Tesla listing
From the instructions
Install only a blade identical to the original. The arm does not lock upright. Do not lift it past its intended position or drop it on the glass.
Tools
A towel between the arm and the glass. The replacement steps do not name a screwdriver or a socket.
Steps
Step 1
Park and switch the wiper off
Shift to Park and set the wiper to Off, not Auto, so it does not sweep if the glass is wet. Lay a towel on the glass and lift the arm only far enough to reach the blade.
Step 2
Release the old blade
Hold the arm, press the locking tab, and slide the blade off the arm. Pull the washer hose off the barb.
Step 3
Fit the new blade
Push the new washer hose onto the barb. Slide the new blade toward the base of the arm until it locks. A correct lock clicks, and a light push-pull should not move the blade.
Step 4
Lower the arm
Take the towel away and set the blade back on the glass.
Follow the manufacturer's instructions; this WedgeMods summary may be incomplete.