Install guide
Superhydrophobic Camera Cover for Cybertruck
Abstract Ocean's rear camera cover steps. The page says the written steps were generated from its install video.
Follow the manufacturer's instructions; this WedgeMods summary may be incomplete.
- Difficulty
- Easy
- Time
- The published instructions do not state a time.
- Product
- Abstract Ocean listing
From the instructions
The page says the cover is meant to last about 3 to 6 months, shorter in heavy dust, and that the adhesive is pressure and heat activated.
Tools
An alcohol swab for a reinstall. A hair dryer or heat gun on low if the weather is cold.
Steps
Step 1
Clean the lens area
Clean around the rear camera so the housing is free of dirt.
Step 2
Align the cover
Line the cover up on the camera housing, using the arch of the housing as the guide.
Step 3
Press it on
Press firmly to set the 3M gel. In the cold, warm the area with a hair dryer or heat gun on low before you stick it.
Step 4
Remove it later
Park in the sun so the adhesive warms, then twist the cover off. Rub leftover adhesive off with a thumb. Clean with an alcohol swab before putting a cover back on.
Follow the manufacturer's instructions; this WedgeMods summary may be incomplete.